I've been trying to find a way to power a Raspberry Pi 4 and a Waveshare Screen (https://a.co/d/bHSbYs7) with a Battery.
I've tried a lot of configurations, including Lipo Amigo Pro, Powerboost 1000, and both of those in conjunction with an XL6009 set to 5 volts.
I've had varying success- usually it gets stuck rebooting or not powering at all. I've gathered it's probably not drawing enough current- so it's powered at 5v but only pulling a single amp and I have no idea how to fix that or it can be at all or if that's the real problem at all.
I'm not sure if I'm missing something or overlooking something as well as still pretty new at this so any help at all would be appreciated.
I've tried a lot of configurations, including Lipo Amigo Pro, Powerboost 1000, and both of those in conjunction with an XL6009 set to 5 volts.
I've had varying success- usually it gets stuck rebooting or not powering at all. I've gathered it's probably not drawing enough current- so it's powered at 5v but only pulling a single amp and I have no idea how to fix that or it can be at all or if that's the real problem at all.
I'm not sure if I'm missing something or overlooking something as well as still pretty new at this so any help at all would be appreciated.
Statistics: Posted by poptop89 — Sun Apr 28, 2024 11:21 pm
