I had a similar problem because I had a 32-bit kernel running in 64-bit mode.
First check whether Raspberry Pi OS is 32-bit or 64-bit.If the command outputs 32, then the OS is 32-bit and if it outputs 64, then the OS is 64-bit. For 32-bit set
arm_64bit=0
For 64-bit set
arm_64bit=1
If you needed to change the setting then reboot.
First check whether Raspberry Pi OS is 32-bit or 64-bit.
Code:
getconf LONG_BITCode:
sudo nano /boot/firmware/config.txtarm_64bit=0
For 64-bit set
arm_64bit=1
If you needed to change the setting then reboot.
Statistics: Posted by skyfish — Mon Aug 12, 2024 3:40 pm