This might be an update worth a moment of thought. I disconnected the three sensors that had been in use. I connected a new DS18B20 where it was the only device on GPIO4. New DS18B20 connected to the same 3V3 rail and ground. I ran "ls /sys/bus/w1/devices" and got FOUR returns with 00-xxxx even though there is only ONE device connected to GPIO4.
I really think my GPIO4 and 1Wire are burnt.
I really think my GPIO4 and 1Wire are burnt.
Statistics: Posted by duckredbeard — Thu Oct 24, 2024 12:20 am