Brought a CM4 recently from pi hut, but when putting into either of my carrier boards (Big tree tech Manta M8P and a pi carrier board) the PWR light comes on as normal but the ACT is solid on aswell with nothing else from the pi.
After some poking around, my 3.3v line is at the same voltage as the 5v line (4.9v), so I can only presume the board is cooked and would need a replacement.
What could be the cause of death?
After some poking around, my 3.3v line is at the same voltage as the 5v line (4.9v), so I can only presume the board is cooked and would need a replacement.
What could be the cause of death?
Statistics: Posted by TigsterUK — Sat Nov 09, 2024 9:20 am