General • Re: RPI pico 2 sleep mode

And 10 uA lower it is.But now at VSYS at 3,6 V. At 125 MHz and clock divider set to 1 it doesn't require setting COOLDOWN to 0. But using powman with boot greisters set to 0, it would require now boot2 (PICO_EMBED_XIP_SETUP 1) sending 0xAB instruction to revive it back again before doing anything else. Maybe compile time definition might be welcome to do that or existing boot2 one might conditionally (if scratch register set to some value) do that. This is a feature request

Statistics: Posted by MatSOBDev2 — Wed Nov 27, 2024 2:32 pm

---