General discussion • Overlay file system on Pi Zero 2 W
Hello. I am trying to set up an overlay file system on my Zero 2 W and not having much luck. I have started with a default OS installation and only made on change to auto start VLC to display a USB...
View ArticleInterfacing (DSI, CSI, I2C, etc.) • Re: Appropriate communications interface...
Yes, but the software isn't there yet. I would recommend using an I2S compatible microphone.Statistics: Posted by jdb — Sat Mar 23, 2024 6:17 pm
View ArticleUbuntu • Re: RPI 5 - UBUNTU 23.1 - Logs - Important
Thanks in advance for your well advised help !If this is important to you, maybe ask for advice from a Canonical/Ubuntu Developer - they are the people who develop and distribute your chosen Operating...
View ArticleRaspberry Pi 400 • Re: Pi400 Bookworm No Audio
Can you post url from "raspinfo | pastebinit" ("sudo apt install pastebinit" if it's not installed).Statistics: Posted by dom — Sat Mar 23, 2024 6:33 pm
View ArticleBeginners • Re: 1B Wifi
How early a 1B? Some have very limited current available to USB devices.We already established (from the other topic the OP started) that it is a Rev 2. Only the one polyfuse on the microUSB power...
View ArticleGeneral discussion • Re: RPi 5 as a desktop daily driver?
Apologies for dragging this thread back on topic...This is exactly what I've been doing since setting up my Pi5 (overclocked to 3GHz) with a 1TB PCIe NVMe SSD running at Gen 3, and an IQaudIO Codec...
View ArticleUbuntu • Re: really need ubuntu22.04 on pi5!!!!!!!!!!!!!!!!!!
ubuntu 23 is not good use as ubuntu22.Raspberry Pi, who provide these forums, have an OS which supports all their hardware.If using your chosen alternative is important to you, maybe ask for advice...
View ArticleBeginners • What is the best cooling system?
Hello everybody !About Raspberry Pi 5, there's this Raspberry Pi Active Cooler: https://www.raspberrypi.com/products/active-cooler/ and this case: https://www.raspberrypi.com/products/ra ......
View ArticleSDK • Re: Random new CMAKE error
It is possible you upgraded CMake and they have switched the default build tool to ninja. You can either install ninja or pass-G "Unix Makefiles" to CMake (you'll need to delete your existing build...
View ArticleBeginners • Re: Intermittent Screen Blanks
Nope, I tried setting the resolution to 800x600 and rebooted, then back to 1024x768 rebooted again. The screen blanking took 8 minutes for the 1st occurrence but then reverted back to the 2-5 min...
View ArticleRaspberry Pi OS • Re: Issues after 24-03 updates RPi5
i have the exact same issues as you and i belive its a problem with PiOS. i've also seen multiple people with the issue over the past week.HDD wont mount and the pi refuses to shutdown or reboot if...
View ArticleBeginners • Powering a Pi4
On my Pi4 the USB C Connector will be inaccessible, is there any other way to power it?Statistics: Posted by rwl518p — Sun Mar 24, 2024 6:30 pm
View ArticleBeginners • Re: Powering a Pi4
Via the GND and 5V pins on the GPIO header.Statistics: Posted by GTR2Fan — Sun Mar 24, 2024 6:33 pm
View ArticleHATs and other add-ons • Re: Problem booting from WD Blue SN580
that might be a batch issue!Can only repeat again that I'm running WD and SanDisk NVMe - which all have SanDisk controllers - just fine on CM4IO baseboards. They don't have 32kHz clock there as well!I...
View ArticleGeneral discussion • Potential fix for bluetooth audio/wifi throughput issues...
Foreword: I have been dealing with choppy, stuttering, crackling bluetooth audio for the last couple years (particularly with bluetooth earbuds). This timeframe includes both a RPI-4 and for the last...
View ArticleNetworking and servers • Re: Powering PI 5 from PSU
Or add the following to the end of your config.txt:Code: [all]usb_max_current_enable=1I tried that in Bookworm when I first got my Pi5 a couple of months ago and still got the on-screen warning of a...
View ArticleTroubleshooting • Re: Waveshare 7" DPI + RPi Zero W - display not working
..And quite honestly, I, and I assume most of us, are not here to give free technical support to a company that makes tons of money and does not help anyone.same here! Will only have a look at all...
View ArticleInterfacing (DSI, CSI, I2C, etc.) • Re: UART 3 and 4 data corrupted when CPU...
when you are getting corruption, report output of:Code: vcgencmd versionuname -avcgencmd get_throttledvcgencmd measure_tempvcgencmd measure_clock coreStatistics: Posted by dom — Mon Mar 25, 2024 6:10 pm
View ArticleCamera board • Re: Increase CMA in legacy mode
another question: is the newer OpenGL version reported for the legacy drivers software implemented?What are you meaning by legacy mode?If the firmware based GLES stack then that is unsupported these...
View ArticleAdvanced users • Did raspicam's /dev/video0 just lose MJPEG format?
Hello everyone,we use Raspberry Pi for teaching operating system fundamentals, and one of the first thing that we show to students is unix's "everything is a file" paradigm. In that sense students...
View Article