Quantcast
Channel: Raspberry Pi Forums
Viewing all articles
Browse latest Browse all 5077

Troubleshooting • Re: Can't get a display image using the HDMI

$
0
0
I'm having the same problems as Mike with my pi4.

The pi seems to see the hdmi (ie using VNC, the Screen Layout Tool reports the correct screen dimensions) but I get no picture. Powering up the pi with no SD card does not cause anything to be shown on the screen like some other posters in this thread. I'm onto my second SD card with a clean install of Bookworm.

My cmdline.txt is as follows:
video=HDMI-A-1:1920x1080@60D console=serial0,115200 console=tty1 root=PARTUUID=d02dbee6-02 rootfstype=ext4 fsck.repair=yes rootwait cfg80211.ieee80211_regdom=AU

and kmsprint output is:
Connector 0 (32) HDMI-A-1 (connected)
Encoder 0 (31) TMDS
Crtc 3 (96) 2560x1440@74.97 304.250 2560/48/32/80/+ 1440/3/5/44/- 75 (74.97)
Plane 3 (86) fb-id: 342 (crtcs: 3) 0,0 2560x1440 -> 0,0 2560x1440 (XR24 AR24 AB24 XB24 RG16 BG16 AR15 XR15 RG24 BG24 YU16 YV16 YU24 YV24 YU12 YV12 NV12 NV21 NV16 NV61 P030 XR30 AR30 AB30 XB30 RGB8 BGR8 XR12 AR12 XB12 AB12 BX12 BA12 RX12 RA12)
FB 342 2560x1440 XR24
Plane 25 (309) fb-id: 343 (crtcs: 3) 0,0 64x64 -> 1278,718 64x64 (XR24 AR24 AB24 XB24 RG16 BG16 AR15 XR15 RG24 BG24 YU16 YV16 YU24 YV24 YU12 YV12 NV12 NV21 NV16 NV61 P030 XR30 AR30 AB30 XB30 RGB8 BGR8 XR12 AR12 XB12 AB12 BX12 BA12 RX12 RA12)
FB 343 64x64 AR24
Connector 1 (42) HDMI-A-2 (disconnected)
Encoder 1 (41) TMDS

I've tried two different monitors and an ancient 1080p TV screen. I'm onto my second hdmi cable, being a micro hdmi to hdmi 4K compatible one. All of my other pis have connected to one or more of these screens at some time in the past.

I'm completely stumped.

Statistics: Posted by nickoppen — Wed Jan 24, 2024 5:51 am



Viewing all articles
Browse latest Browse all 5077

Trending Articles