Compute Module • Re: CM4 eMMC wear leveling
Is the eMMC more durable than normal SD card? I found industrial eMMC with SLC flash but their price is higher than total price of CM4.Statistics: Posted by i486 — Sat Jun 15, 2024 5:40 am
View ArticleNetworking and servers • Re: IP forwarding between different networks
OK,I resolved the issue. In the Tailscale dashboard, I "approved" the subnets for the node, and everything is working now.Statistics: Posted by mubinicyer — Sat Jun 15, 2024 5:51 am
View ArticleTroubleshooting • Brand new RPi 4B no longer booting any OS
A brand new Pi 4B of mine was used to run Volumio with a 7" touchscreen connected via HDMI. It booted fine, I went through the installation steps and tried installing their listed plugin for the...
View ArticleHATs and other add-ons • Re: Lecroy HDO6104 oscilloscope with pyvisa
It worked. I changed the interface from USB to LAN(LXI) for Lecroy.@Pranjol93 I have noticed that for most oscilloscopes LXI is much more robust than USB. I have not tested my Lecroy python scripts...
View ArticleGeneral discussion • Re: Raspberry Pi Camera Module 3 Windows
It will not work at all under Windows 11.Statistics: Posted by scruss — Sun Jun 16, 2024 2:47 am
View ArticleNetworking and servers • Re: VNC conversion from Home Account to the free...
https://help.realvnc.com/hc/en-us/artic ... belongs-to This worked for me. Thanks Charlie, that was the way that worked for me too.P.S. the link describes the procedure for PC and Macs, it works for...
View ArticleCamera board • How to setup a local webcam on an RPi5
I have an imx296 camera on an RPi5 8GB, and all the pieces appear to fit, including the kernel, libcamera, rpicam-apps, and ton of gstreamer plugins, etc.. Camera is detected and functional, as much...
View ArticleAndroid • Re: [DEV] LineageOS 21 (Android 14) for Raspberry Pi 4 & Pi 5
Can anyone help with this one,I have set my GPIO pins as per the following in my config.txtCode: # Keysdtoverlay=gpio-key,gpio=26,keycode=115,label="VOLUME_UP"...
View ArticleBeginners • Re: Pi Zero 2 W: Error -110 on first boot.
The WiFi is 5GHz. I am using an EdgeRouter i think the rpi0 is 2.4ghz onlyif you have a screen & keyboard try skipping the pre settingsStatistics: Posted by kerry_s — Sun Jun 16, 2024 3:52 am
View ArticleGeneral • Re: Help with Pico ADC project
Just before proceeding, I am just trying to get all the GPIO buttons working on the PI.Its a bit strange though, as the VOLUME_DOWN and PREVIOUS_TRACK buttons just will not function, all other buttons...
View ArticleTroubleshooting • RaspberryPI errors during sudo apt update
Any help appreciated. I have a Raspberry3 with bookworm This page did not help: https://forums.raspberrypi.com/viewtopi ... d5f9547dbd cat /etc/resolv.conf# Generated by NetworkManagersearch...
View ArticleTroubleshooting • Re: RaspberryPI errors during sudo apt update
check your pi-hole settings for what dns you have set.ortemporarily disable pi-holei also recall you can white list sitesStatistics: Posted by kerry_s — Sun Jun 16, 2024 4:56 am
View ArticleTroubleshooting • Re: New Pi won't show desktop
I've gotten it to a state I can use.In the config file I commented out dtoverlay=vc4-kms-v3d. I had done this before, without success. By chance I saw a screenshot of someone else's config. I...
View ArticleNetworking and servers • Re: Both access point and Wi-Fi connection on the...
AP-STA sounds good and there are effects. Using a WiFI device for both in and out halves the speed. You see the same effect when using a repeater with just one WiFi chip. The dual use of the WiFi chip...
View ArticleTroubleshooting • Raspberry pi 4B reconnecting all USB
Hi,I'm building a product that will contain a Raspberry pi 4B with a Sim7600X hat from waveshare, and some other USBs.It seems I'm facing some issue with power, but it's been giving me a hard time...
View ArticleTroubleshooting • Re: Brand new RPi 4B no longer booting any OS
4 Long 7 short is a power failure error.As it's brand new my advice is to return to seller for a refund replacement.Statistics: Posted by wildfire — Mon Jun 17, 2024 12:17 am
View ArticleTroubleshooting • Re: How to reduce servo jitter on the raspberry pi 5?
is it using software or hardware pwm?hardware pwm should have far lower jitterStatistics: Posted by cleverca22 — Mon Jun 17, 2024 12:48 am
View ArticleRaspberry Pi OS • Re: How to remove extra architectures from updates?
@rpdom, TYVM! Statistics: Posted by mtinman — Mon Jun 17, 2024 1:11 am
View ArticleNetworking and servers • Re: nmcli, Network Manager CLI, has naming problem.
I found out you have to use con-name to give your own name to a connection. Unfortunately the best documentation i can find, from redhat, does not consistently tell you where you can your name in...
View ArticleTroubleshooting • Re: Raspery Pie 5 Ethernet resets permanently
Same result, anyone any Idea what I am Missing Here?A good cable?Statistics: Posted by pidd — Mon Jun 17, 2024 1:49 am
View Article