Troubleshooting • Re: Signal fails to install
Pi-Apps installs the unofficial Signal app. Or just download it and use apt to install it.https://github.com/dennisameling/Signal-DesktopSignal Unofficial (arm64)This repository is a fork of the...
View ArticleBeginners • Re: how to connect to headless raspberry pi without network
Yes, any TTL serial to RS232/423 adapter that runs off 3.3V should be suitable for connecting to any Pi's UARTs. Just don't use a 5V device or connect them direct to anything other than another 3.3V...
View ArticleCompute Module • Re: CM4: Skipping PCIe LTSSM rx-detect?
.... it turns out that I didn't need to do this on the Raspberry-pi side. There is an option in the PCIe spec to skip rx-detection if the other end starts transmitting data & and it appears that...
View ArticleSDK • Re: What else is blink example doing?
Thanks,That's what I am learning. The documentation explains a lot except some of the more common mistakes. I am able to write the programs I want but learning what hoops I need to go through to...
View ArticleHATs and other add-ons • Re: A case for rethinking Pi5 cooling
@piddWell, Chris Barnatt's data is pretty conclusive, I guess.Ah yes, I was talking about the official case with its standard fan, I thought it would be the other way around..On the temperature and...
View ArticleGeneral • Re: RPi Pico PWM Switch time
Bitbang just means using the GPIO to produce the pulses (coded in software, as opposed to using a peripheral). Since generally you're never signalling faster than 1200Hz == 833 us per output cycle, on...
View ArticleOther projects • How can I disable GPIO button presses while video is played?
I have this project where I am making a sort of space ship command panel for use in the kindergarten I work in, where I aim to integrate a Raspberry Pi in the kids' play. I use buttons to execute...
View ArticleOther projects • Re: Initiate commands through QR code/bar code with camera...
This will be used by kids down to 3 years old, so I need something simpler than that. I need to be able to just power up and have it running straight from the command line, completely offline, and...
View ArticleOther projects • Re: How can I disable GPIO button presses while video is...
How can I disable GPIO button presses while video is played?You don't. Instead you simply ignore GPIO button presses while a video is playing. That's basically what you are trying to do with the...
View ArticleRaspberry Pi OS • UART (pins 14 & 15) support in Raspbian 12
For the life of me, I can't figure out what they changed in Raspbian 12 (32 bit) on the model 3 B+.In Raspbian 11, I had to do the routine steps in raspi-config to enable the serial port and disable...
View ArticleAdvanced users • Re: ADATA SD620 external SSD: eject does not function properly
Mount it on your Windows system, share it as an SMB share, mount that on your Linux system.Statistics: Posted by DougieLawson — Thu Sep 26, 2024 10:44 pm
View ArticleHATs and other add-ons • Re: Waveshare 1.69 display and Raspberryt PI 5
Thanks for your response unfortunately it didnt help in my case.My project is to build a raspberry pi 5 connected to either of the following displays. (240x240, 240x280)ST7789ST7789V2ST7735I am trying...
View ArticleTroubleshooting • Re: WD Blue SN580 not detected with CM4
I updated the SN580's firmware from 281010WD to 281040WD with my Windows PC. It remains undetected in the CM4 system.I also tested a Sabrent Rocket NVMe4 1TB in the CM4 system and it was detected...
View ArticleBeginners • Re: Looking for a good screen with certain spec
You're unlikely to find HDMI display at that price as manufacturer has to have HDMI group membership at $10k a year plus royalties. Might be some DVI ones though, but I suspect most will be SPI.Ahh...
View ArticleRaspberry Pi OS • Re: UART (pins 14 & 15) support in Raspbian 12
Try using /dev/serial0. That should be a symlink to the correct uart device.Statistics: Posted by thagrol — Thu Sep 26, 2024 11:29 pm
View ArticleGeneral • Re: Pico W - OTA Update working
Is this OTA updating the firmware (such as the micropython firmware) or just the application running on an existing 'firmware'?Looking for a way to update the Micropython firmware (the firmware...
View ArticleGeneral discussion • Re: New Raspberry Pi Products
If an RM2 variant with a connector fitted were only sold packaged with a compliant external antenna there would be little incentive to use some other non-compliant antenna. Other manufacturers appear...
View ArticleTroubleshooting • Re: Waveshare 4.3in DSI LCD works but no touch
Same issue here. Any progress?Statistics: Posted by mikulik86 — Fri Sep 27, 2024 9:11 pm
View ArticleBeginners • RP2040 power voltage readout?
HiI am running the RP2040 off of a 3.7v Li-ion battery.Can I get the power voltage of the RP2040 somehow?Or do I need to use a separate analog input?It's a Seeed XIAO RP2040 I am...
View ArticleHATs and other add-ons • Re: Stacking Build HAT and Sense HAT on Raspberry Pi5
[*]All HAT EEPROM have the same address.* Outside of pin conflicts this is the primary reason they cannot be stacked.Oops..However, with respect to the specific case of stacking Sense HAT on top of...
View Article